전체상품목록 바로가기

본문 바로가기



상품조르기 대량구매문의

FIT Shiv V3 Fork (해외배송 가능상품)

기본 정보
상품명 FIT Shiv V3 Fork
제조사 FITBIKECO / USA
원산지 TAIWAM OEM
소비자가 210,000원
판매가 210,000원
적립금 2,100원 (1%)
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
FIT Shiv V3 Fork 수량증가 수량감소 (  2100)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록


 


FIT 바이크사의 Shiv V3 포크입고





빠른 반응을 추구하는 라이더에게 추천

2년동안 개발 및 테스트 후 출시

100% 4Q Baked 열처리 크로몰리

포크하단내부 보강, 1PC 크로몰리 스티어링

인터그레이티드 전용 헤드셋만 장착가능
오프셋 : 25mm
무게 : 1,020g






FIT Shiv V3 Fork


Our goal was to design and produce an extremely strong fork with plenty of tire clearance.
After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset.
Here are a few features that make these forks so strong.
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
Post weld 4Q Baked heat-treatment


Legs : Seamless Swaged (No Welded Cap)
Dropouts : Investment Cast
Steerer Tube : 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length : 166mm
Compression : M24 X 1.5 Thread – 6mm Allen Slot
Axle to Crown : 320mm
Offset : 25mm
Weight : 2.25 lb (1.02 kg)
Heat Treat : 4Q Baked Post-Weld



SPECS >
Legs Double Butted, Tapered 4130 CrMo
Dropouts Laser Cut 3/8″ Slot
Steerer Tube 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length 162mm
Compression M10 X 1.25 Thread ? 6mm Allen Slot
Axle to Crown 320mm
Offset 1″ (25mm)
Weight 2.21 lb (1.0 kg)
Heat Treat 4Q Baked Post-Weld




















게시물이 없습니다

후기작성